For a curve r ( t ) = ⟨ x ( t ) , y ( t ) , z ( t ) ⟩ \mathbf{r}(t) = \langle x(t), y(t), z(t)\rangle r ( t ) = ⟨ x ( t ) , y ( t ) , z ( t )⟩ , the
speed is ∣ r ′ ( t ) ∣ |\mathbf{r}'(t)| ∣ r ′ ( t ) ∣ . Over a short
time d t dt d t the point moves about ∣ r ′ ( t ) ∣ d t |\mathbf{r}'(t)|\,dt ∣ r ′ ( t ) ∣ d t , so the length from t = a t = a t = a to t = b t = b t = b is
L = ∫ a b ∣ r ′ ( t ) ∣ d t = ∫ a b x ′ ( t ) 2 + y ′ ( t ) 2 + z ′ ( t ) 2 d t L = \int_a^b |\mathbf{r}'(t)|\,dt = \int_a^b \sqrt{x'(t)^2 + y'(t)^2 + z'(t)^2}\,dt L = ∫ a b ∣ r ′ ( t ) ∣ d t = ∫ a b x ′ ( t ) 2 + y ′ ( t ) 2 + z ′ ( t ) 2 d t
The arc length function s ( t ) = ∫ a t ∣ r ′ ( u ) ∣ d u s(t) = \int_a^t |\mathbf{r}'(u)|\,du s ( t ) = ∫ a t ∣ r ′ ( u ) ∣ d u measures distance traveled.
Rewriting the curve in terms of s s s gives a parametrization with speed exactly 1 1 1 .
The unit tangent T = r ′ ∣ r ′ ∣ \mathbf{T} = \tfrac{\mathbf{r}'}{|\mathbf{r}'|} T = ∣ r ′ ∣ r ′ points along the curve. On a line it never
changes; on a tight bend it swings quickly. Curvature is that rate of turning
per unit of distance:
κ = ∣ d T d s ∣ = ∣ r ′ ( t ) × r ′ ′ ( t ) ∣ ∣ r ′ ( t ) ∣ 3 \kappa = \left|\frac{d\mathbf{T}}{ds}\right| = \frac{|\mathbf{r}'(t) \times \mathbf{r}''(t)|}{|\mathbf{r}'(t)|^3} κ = d s d T = ∣ r ′ ( t ) ∣ 3 ∣ r ′ ( t ) × r ′′ ( t ) ∣
The principal normal N = T ′ ∣ T ′ ∣ \mathbf{N} = \tfrac{\mathbf{T}'}{|\mathbf{T}'|} N = ∣ T ′ ∣ T ′ points the way the curve is turning.
Write r ′ = v T \mathbf{r}' = v\mathbf{T} r ′ = v T , where v = ∣ r ′ ∣ v = |\mathbf{r}'| v = ∣ r ′ ∣ . Differentiating, r ′ ′ = v ′ T + v T ′ \mathbf{r}'' = v'\mathbf{T} + v\mathbf{T}' r ′′ = v ′ T + v T ′ .
Cross with r ′ \mathbf{r}' r ′ : the T × T \mathbf{T} \times \mathbf{T} T × T term is zero, leaving
r ′ × r ′ ′ = v 2 T × T ′ \mathbf{r}' \times \mathbf{r}'' = v^2\,\mathbf{T} \times \mathbf{T}' r ′ × r ′′ = v 2 T × T ′ . Since T \mathbf{T} T has constant length, T ′ \mathbf{T}' T ′ is perpendicular
to T \mathbf{T} T , so ∣ T × T ′ ∣ = ∣ T ′ ∣ |\mathbf{T} \times \mathbf{T}'| = |\mathbf{T}'| ∣ T × T ′ ∣ = ∣ T ′ ∣ . Thus ∣ r ′ × r ′ ′ ∣ = v 2 ∣ T ′ ∣ |\mathbf{r}' \times \mathbf{r}''| = v^2|\mathbf{T}'| ∣ r ′ × r ′′ ∣ = v 2 ∣ T ′ ∣ . Finally
κ = ∣ T ′ ( t ) ∣ v \kappa = \tfrac{|\mathbf{T}'(t)|}{v} κ = v ∣ T ′ ( t ) ∣ , because d s = v d t ds = v\,dt d s = v d t . Combining, κ = ∣ r ′ × r ′ ′ ∣ v 3 \kappa = \tfrac{|\mathbf{r}' \times \mathbf{r}''|}{v^3} κ = v 3 ∣ r ′ × r ′′ ∣ : the part of
the acceleration that bends the path, scaled by the cube of the speed.
The helix (3 cos t, 3 sin t, 4t)
A helix winding once around the z-axis, radius 3, rising from height 0 to 8π. At its start, the unit tangent vector points along the curve, and the normal vector points straight in toward the axis.
x
y
z
r(t)
T
N
The helix (3 cos t, 3 sin t, 4t)
Example 1 — The helix
For r ( t ) = ⟨ 3 cos t , 3 sin t , 4 t ⟩ \mathbf{r}(t) = \langle 3\cos t, 3\sin t, 4t\rangle r ( t ) = ⟨ 3 cos t , 3 sin t , 4 t ⟩ , find the length of one turn and the curvature.
r ′ = ⟨ − 3 sin t , 3 cos t , 4 ⟩ \mathbf{r}' = \langle -3\sin t, 3\cos t, 4\rangle r ′ = ⟨ − 3 sin t , 3 cos t , 4 ⟩ has speed 9 + 16 = 5 \sqrt{9 + 16} = 5 9 + 16 = 5 , so one turn,
0 ≤ t ≤ 2 π 0 \le t \le 2\pi 0 ≤ t ≤ 2 π , has length 10 π 10\pi 10 π . Next, r ′ ′ = ⟨ − 3 cos t , − 3 sin t , 0 ⟩ \mathbf{r}'' = \langle -3\cos t, -3\sin t, 0\rangle r ′′ = ⟨ − 3 cos t , − 3 sin t , 0 ⟩ and
r ′ × r ′ ′ = ⟨ 12 sin t , − 12 cos t , 9 ⟩ , ∣ r ′ × r ′ ′ ∣ = 15 \mathbf{r}' \times \mathbf{r}'' = \langle 12\sin t, -12\cos t, 9\rangle, \qquad |\mathbf{r}' \times \mathbf{r}''| = 15 r ′ × r ′′ = ⟨ 12 sin t , − 12 cos t , 9 ⟩ , ∣ r ′ × r ′′ ∣ = 15 So κ = 15 125 = 3 25 \kappa = \tfrac{15}{125} = \tfrac{3}{25} κ = 125 15 = 25 3 , the same at every point. At t = 0 t = 0 t = 0 ,
T = 1 5 ⟨ 0 , 3 , 4 ⟩ \mathbf{T} = \tfrac{1}{5}\langle 0, 3, 4\rangle T = 5 1 ⟨ 0 , 3 , 4 ⟩ and N = ⟨ − 1 , 0 , 0 ⟩ \mathbf{N} = \langle -1, 0, 0\rangle N = ⟨ − 1 , 0 , 0 ⟩ , pointing in toward the axis.
Example 2 — Reparametrizing by arc length
Write the helix in terms of arc length from t = 0 t = 0 t = 0 .
s = ∫ 0 t 5 d u = 5 t s = \int_0^t 5\,du = 5t s = ∫ 0 t 5 d u = 5 t , so t = s 5 t = \tfrac{s}{5} t = 5 s and
r ( s ) = ⟨ 3 cos s 5 , 3 sin s 5 , 4 s 5 ⟩ \mathbf{r}(s) = \left\langle 3\cos\tfrac{s}{5},\ 3\sin\tfrac{s}{5},\ \tfrac{4s}{5}\right\rangle r ( s ) = ⟨ 3 cos 5 s , 3 sin 5 s , 5 4 s ⟩ Its speed is 9 25 + 16 25 = 1 \sqrt{\tfrac{9}{25} + \tfrac{16}{25}} = 1 25 9 + 25 16 = 1 .
Example 3 — A twisted cubic
Find the curvature of r ( t ) = ⟨ t , t 2 , t 3 ⟩ \mathbf{r}(t) = \langle t, t^2, t^3\rangle r ( t ) = ⟨ t , t 2 , t 3 ⟩ at t = 0 t = 0 t = 0 and t = 1 t = 1 t = 1 .
r ′ = ⟨ 1 , 2 t , 3 t 2 ⟩ \mathbf{r}' = \langle 1, 2t, 3t^2\rangle r ′ = ⟨ 1 , 2 t , 3 t 2 ⟩ and r ′ ′ = ⟨ 0 , 2 , 6 t ⟩ \mathbf{r}'' = \langle 0, 2, 6t\rangle r ′′ = ⟨ 0 , 2 , 6 t ⟩ . At t = 0 t = 0 t = 0 : r ′ × r ′ ′ = ⟨ 0 , 0 , 2 ⟩ \mathbf{r}' \times \mathbf{r}'' = \langle 0, 0, 2\rangle r ′ × r ′′ = ⟨ 0 , 0 , 2 ⟩ and
∣ r ′ ∣ = 1 |\mathbf{r}'| = 1 ∣ r ′ ∣ = 1 , so κ = 2 \kappa = 2 κ = 2 . At t = 1 t = 1 t = 1 : r ′ × r ′ ′ = ⟨ 6 , − 6 , 2 ⟩ \mathbf{r}' \times \mathbf{r}'' = \langle 6, -6, 2\rangle r ′ × r ′′ = ⟨ 6 , − 6 , 2 ⟩ , of length 76 \sqrt{76} 76 , and
∣ r ′ ∣ 3 = 14 3 / 2 |\mathbf{r}'|^3 = 14^{3/2} ∣ r ′ ∣ 3 = 1 4 3/2 , so κ = 76 14 3 / 2 ≈ 0.166 \kappa = \tfrac{\sqrt{76}}{14^{3/2}} \approx 0.166 κ = 1 4 3/2 76 ≈ 0.166 . The curve straightens as it goes.
Common mistake
Using ∣ r ′ ′ ∣ |\mathbf{r}''| ∣ r ′′ ∣ for curvature. Acceleration includes speeding up along the
path, which does not bend it. Only the part perpendicular to r ′ \mathbf{r}' r ′ counts, which
is what the cross product picks out.
Common mistake
Forgetting the cube. The denominator is ∣ r ′ ∣ 3 |\mathbf{r}'|^3 ∣ r ′ ∣ 3 , not ∣ r ′ ∣ 2 |\mathbf{r}'|^2 ∣ r ′ ∣ 2 . For the helix,
15 25 \tfrac{15}{25} 25 15 would be wrong; the answer is 15 125 \tfrac{15}{125} 125 15 .
Common mistake
Integrating the position instead of the speed. Arc length is ∫ ∣ r ′ ( t ) ∣ d t \int |\mathbf{r}'(t)|\,dt ∫ ∣ r ′ ( t ) ∣ d t . The
square root of a sum of squares rarely simplifies, so look for curves where it does.
Find the length of r ( t ) = ⟨ cos t , sin t , t ⟩ \mathbf{r}(t) = \langle \cos t, \sin t, t\rangle r ( t ) = ⟨ cos t , sin t , t ⟩ for 0 ≤ t ≤ 2 π 0 \le t \le 2\pi 0 ≤ t ≤ 2 π .
Answer
2 2 π 2\sqrt{2}\,\pi 2 2 π
Full solution
∣ r ′ ∣ = sin 2 t + cos 2 t + 1 = 2 |\mathbf{r}'| = \sqrt{\sin^2 t + \cos^2 t + 1} = \sqrt{2} ∣ r ′ ∣ = sin 2 t + cos 2 t + 1 = 2 , a constant.
Find the curvature of the helix ⟨ cos t , sin t , t ⟩ \langle \cos t, \sin t, t\rangle ⟨ cos t , sin t , t ⟩ .
Answer
1 2 \tfrac{1}{2} 2 1
Full solution
r ′ × r ′ ′ = ⟨ sin t , − cos t , 1 ⟩ \mathbf{r}' \times \mathbf{r}'' = \langle \sin t, -\cos t, 1\rangle r ′ × r ′′ = ⟨ sin t , − cos t , 1 ⟩ , of length 2 \sqrt{2} 2 , and ∣ r ′ ∣ 3 = 2 2 |\mathbf{r}'|^3 = 2\sqrt{2} ∣ r ′ ∣ 3 = 2 2 .
Find the curvature of a circle of radius 5 5 5 .
Answer
1 5 \tfrac{1}{5} 5 1
Full solution
For ⟨ 5 cos t , 5 sin t , 0 ⟩ \langle 5\cos t, 5\sin t, 0\rangle ⟨ 5 cos t , 5 sin t , 0 ⟩ , ∣ r ′ × r ′ ′ ∣ = 25 |\mathbf{r}' \times \mathbf{r}''| = 25 ∣ r ′ × r ′′ ∣ = 25 and ∣ r ′ ∣ 3 = 125 |\mathbf{r}'|^3 = 125 ∣ r ′ ∣ 3 = 125 .
Find the length of r ( t ) = ⟨ 2 t , t 2 , ln t ⟩ \mathbf{r}(t) = \langle 2t, t^2, \ln t\rangle r ( t ) = ⟨ 2 t , t 2 , ln t ⟩ for 1 ≤ t ≤ e 1 \le t \le e 1 ≤ t ≤ e .
Answer
e 2 e^2 e 2
Full solution
∣ r ′ ∣ 2 = 4 + 4 t 2 + 1 t 2 = ( 2 t + 1 t ) 2 |\mathbf{r}'|^2 = 4 + 4t^2 + \tfrac{1}{t^2} = \left(2t + \tfrac{1}{t}\right)^2 ∣ r ′ ∣ 2 = 4 + 4 t 2 + t 2 1 = ( 2 t + t 1 ) 2 , so L = [ t 2 + ln t ] 1 e = e 2 + 1 − 1 L = \left[t^2 + \ln t\right]_1^e = e^2 + 1 - 1 L = [ t 2 + ln t ] 1 e = e 2 + 1 − 1 .
Find the length of r ( t ) = ⟨ e t cos t , e t sin t , e t ⟩ \mathbf{r}(t) = \langle e^t\cos t, e^t\sin t, e^t\rangle r ( t ) = ⟨ e t cos t , e t sin t , e t ⟩ for 0 ≤ t ≤ 1 0 \le t \le 1 0 ≤ t ≤ 1 .
Answer
3 ( e − 1 ) \sqrt{3}\,(e - 1) 3 ( e − 1 )
Full solution
∣ r ′ ∣ 2 = e 2 t [ ( cos t − sin t ) 2 + ( sin t + cos t ) 2 + 1 ] = 3 e 2 t |\mathbf{r}'|^2 = e^{2t}\left[(\cos t - \sin t)^2 + (\sin t + \cos t)^2 + 1\right] = 3e^{2t} ∣ r ′ ∣ 2 = e 2 t [ ( cos t − sin t ) 2 + ( sin t + cos t ) 2 + 1 ] = 3 e 2 t .
Find the curvature of y = x 2 y = x^2 y = x 2 at x = 0 x = 0 x = 0 and at x = 1 x = 1 x = 1 .
Answer
2 2 2 and 2 5 3 / 2 ≈ 0.179 \tfrac{2}{5^{3/2}} \approx 0.179 5 3/2 2 ≈ 0.179
Full solution
Use κ = ∣ f ′ ′ ∣ ( 1 + f ′ 2 ) 3 / 2 \kappa = \tfrac{\lvert f''\rvert}{(1 + f'^2)^{3/2}} κ = ( 1 + f ′2 ) 3/2 ∣ f ′′ ∣ with f ′ = 2 x f' = 2x f ′ = 2 x and f ′ ′ = 2 f'' = 2 f ′′ = 2 .
What is the curvature of a straight line r ( t ) = a + t b \mathbf{r}(t) = \mathbf{a} + t\mathbf{b} r ( t ) = a + t b ?
Answer
0 0 0
Full solution
r ′ ′ = 0 \mathbf{r}'' = \mathbf{0} r ′′ = 0 , so the cross product is zero.
A student finds the helix curvature as ∣ r ′ ′ ∣ ∣ r ′ ∣ 2 = 3 25 \tfrac{|\mathbf{r}''|}{|\mathbf{r}'|^2} = \tfrac{3}{25} ∣ r ′ ∣ 2 ∣ r ′′ ∣ = 25 3 and says the formula works. Why is that a coincidence?
Answer
The speed is constant, so r ′ ′ \mathbf{r}'' r ′′ happens to be perpendicular to r ′ \mathbf{r}' r ′ .
Full solution
With changing speed, r ′ ′ \mathbf{r}'' r ′′ has a component along T \mathbf{T} T that does not bend the path. For ⟨ t , t 2 , t 3 ⟩ \langle t, t^2, t^3\rangle ⟨ t , t 2 , t 3 ⟩ at t = 1 t = 1 t = 1 , ∣ r ′ ′ ∣ ∣ r ′ ∣ 2 = 40 14 ≈ 0.45 \tfrac{|\mathbf{r}''|}{|\mathbf{r}'|^2} = \tfrac{\sqrt{40}}{14} \approx 0.45 ∣ r ′ ∣ 2 ∣ r ′′ ∣ = 14 40 ≈ 0.45 , far from 0.166 0.166 0.166 .